Transactions
Token Transfers
Tokens
Internal Transactions
Coin Balance History
Logs
Code
Read Contract
Write Contract
- Contract name:
- KaidexMasterChef
- Optimization enabled
- true
- Compiler version
- v0.8.4+commit.c7e474f2
- Optimization runs
- 200
- EVM Version
- default
- Verified at
- 2022-07-22T06:37:31.038555Z
Constructor Arguments
000000000000000000000000e9cac5d99375d02fb506be890011b2f57fc614e10000000000000000000000000000000000000000000000007759566f6c5c000000000000000000000000000000000000000000000000000000000000008cd908
Arg [0] (address) : 0xe9cac5d99375d02fb506be890011b2f57fc614e1
Arg [1] (uint256) : 8600000000000000000
Arg [2] (uint256) : 9230600
Contract source code
// Sources flattened with hardhat v2.9.3 https://hardhat.org
// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v4.5.0
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File @openzeppelin/contracts/utils/Address.sol@v4.5.0
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File @openzeppelin/contracts/utils/structs/EnumerableSet.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
// File @openzeppelin/contracts/utils/math/SafeMath.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File @openzeppelin/contracts/utils/Context.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/access/Ownable.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File @openzeppelin/contracts/token/ERC20/ERC20.sol@v4.5.0
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, _allowances[owner][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = _allowances[owner][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Spend `amount` form the allowance of `owner` toward `spender`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File @openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// File @openzeppelin/contracts/utils/Strings.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File @openzeppelin/contracts/utils/cryptography/ECDSA.sol@v4.5.0
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// File @openzeppelin/contracts/utils/cryptography/draft-EIP712.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/draft-EIP712.sol)
pragma solidity ^0.8.0;
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/
abstract contract EIP712 {
/* solhint-disable var-name-mixedcase */
// Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
// invalidate the cached domain separator if the chain id changes.
bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
uint256 private immutable _CACHED_CHAIN_ID;
address private immutable _CACHED_THIS;
bytes32 private immutable _HASHED_NAME;
bytes32 private immutable _HASHED_VERSION;
bytes32 private immutable _TYPE_HASH;
/* solhint-enable var-name-mixedcase */
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) {
bytes32 hashedName = keccak256(bytes(name));
bytes32 hashedVersion = keccak256(bytes(version));
bytes32 typeHash = keccak256(
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
);
_HASHED_NAME = hashedName;
_HASHED_VERSION = hashedVersion;
_CACHED_CHAIN_ID = block.chainid;
_CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
_CACHED_THIS = address(this);
_TYPE_HASH = typeHash;
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view returns (bytes32) {
if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
return _CACHED_DOMAIN_SEPARATOR;
} else {
return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
}
}
function _buildDomainSeparator(
bytes32 typeHash,
bytes32 nameHash,
bytes32 versionHash
) private view returns (bytes32) {
return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
}
}
// File @openzeppelin/contracts/utils/Counters.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File @openzeppelin/contracts/token/ERC20/extensions/draft-ERC20Permit.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-ERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*
* _Available since v3.4._
*/
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
using Counters for Counters.Counter;
mapping(address => Counters.Counter) private _nonces;
// solhint-disable-next-line var-name-mixedcase
bytes32 private immutable _PERMIT_TYPEHASH =
keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
/**
* @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
*
* It's a good idea to use the same `name` that is defined as the ERC20 token name.
*/
constructor(string memory name) EIP712(name, "1") {}
/**
* @dev See {IERC20Permit-permit}.
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual override {
require(block.timestamp <= deadline, "ERC20Permit: expired deadline");
bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));
bytes32 hash = _hashTypedDataV4(structHash);
address signer = ECDSA.recover(hash, v, r, s);
require(signer == owner, "ERC20Permit: invalid signature");
_approve(owner, spender, value);
}
/**
* @dev See {IERC20Permit-nonces}.
*/
function nonces(address owner) public view virtual override returns (uint256) {
return _nonces[owner].current();
}
/**
* @dev See {IERC20Permit-DOMAIN_SEPARATOR}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view override returns (bytes32) {
return _domainSeparatorV4();
}
/**
* @dev "Consume a nonce": return the current value and increment.
*
* _Available since v4.1._
*/
function _useNonce(address owner) internal virtual returns (uint256 current) {
Counters.Counter storage nonce = _nonces[owner];
current = nonce.current();
nonce.increment();
}
}
// File @openzeppelin/contracts/utils/math/Math.sol@v4.5.0
// OpenZeppelin Contracts (last updated v4.5.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a / b + (a % b == 0 ? 0 : 1);
}
}
// File @openzeppelin/contracts/governance/utils/IVotes.sol@v4.5.0
// OpenZeppelin Contracts (last updated v4.5.0) (governance/utils/IVotes.sol)
pragma solidity ^0.8.0;
/**
* @dev Common interface for {ERC20Votes}, {ERC721Votes}, and other {Votes}-enabled contracts.
*
* _Available since v4.5._
*/
interface IVotes {
/**
* @dev Emitted when an account changes their delegate.
*/
event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);
/**
* @dev Emitted when a token transfer or delegate change results in changes to a delegate's number of votes.
*/
event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);
/**
* @dev Returns the current amount of votes that `account` has.
*/
function getVotes(address account) external view returns (uint256);
/**
* @dev Returns the amount of votes that `account` had at the end of a past block (`blockNumber`).
*/
function getPastVotes(address account, uint256 blockNumber) external view returns (uint256);
/**
* @dev Returns the total supply of votes available at the end of a past block (`blockNumber`).
*
* NOTE: This value is the sum of all available votes, which is not necessarily the sum of all delegated votes.
* Votes that have not been delegated are still part of total supply, even though they would not participate in a
* vote.
*/
function getPastTotalSupply(uint256 blockNumber) external view returns (uint256);
/**
* @dev Returns the delegate that `account` has chosen.
*/
function delegates(address account) external view returns (address);
/**
* @dev Delegates votes from the sender to `delegatee`.
*/
function delegate(address delegatee) external;
/**
* @dev Delegates votes from signer to `delegatee`.
*/
function delegateBySig(
address delegatee,
uint256 nonce,
uint256 expiry,
uint8 v,
bytes32 r,
bytes32 s
) external;
}
// File @openzeppelin/contracts/utils/math/SafeCast.sol@v4.5.0
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeCast.sol)
pragma solidity ^0.8.0;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint224 from uint256, reverting on
* overflow (when the input is greater than largest uint224).
*
* Counterpart to Solidity's `uint224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*/
function toUint224(uint256 value) internal pure returns (uint224) {
require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
return uint224(value);
}
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint96 from uint256, reverting on
* overflow (when the input is greater than largest uint96).
*
* Counterpart to Solidity's `uint96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*/
function toUint96(uint256 value) internal pure returns (uint96) {
require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
return uint96(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128) {
require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
return int128(value);
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64) {
require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
return int64(value);
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32) {
require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
return int32(value);
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16) {
require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
return int16(value);
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits.
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8) {
require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
return int8(value);
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*/
function toInt256(uint256 value) internal pure returns (int256) {
// Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
// File @openzeppelin/contracts/token/ERC20/extensions/ERC20Votes.sol@v4.5.0
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Votes.sol)
pragma solidity ^0.8.0;
/**
* @dev Extension of ERC20 to support Compound-like voting and delegation. This version is more generic than Compound's,
* and supports token supply up to 2^224^ - 1, while COMP is limited to 2^96^ - 1.
*
* NOTE: If exact COMP compatibility is required, use the {ERC20VotesComp} variant of this module.
*
* This extension keeps a history (checkpoints) of each account's vote power. Vote power can be delegated either
* by calling the {delegate} function directly, or by providing a signature to be used with {delegateBySig}. Voting
* power can be queried through the public accessors {getVotes} and {getPastVotes}.
*
* By default, token balance does not account for voting power. This makes transfers cheaper. The downside is that it
* requires users to delegate to themselves in order to activate checkpoints and have their voting power tracked.
*
* _Available since v4.2._
*/
abstract contract ERC20Votes is IVotes, ERC20Permit {
struct Checkpoint {
uint32 fromBlock;
uint224 votes;
}
bytes32 private constant _DELEGATION_TYPEHASH =
keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");
mapping(address => address) private _delegates;
mapping(address => Checkpoint[]) private _checkpoints;
Checkpoint[] private _totalSupplyCheckpoints;
/**
* @dev Get the `pos`-th checkpoint for `account`.
*/
function checkpoints(address account, uint32 pos) public view virtual returns (Checkpoint memory) {
return _checkpoints[account][pos];
}
/**
* @dev Get number of checkpoints for `account`.
*/
function numCheckpoints(address account) public view virtual returns (uint32) {
return SafeCast.toUint32(_checkpoints[account].length);
}
/**
* @dev Get the address `account` is currently delegating to.
*/
function delegates(address account) public view virtual override returns (address) {
return _delegates[account];
}
/**
* @dev Gets the current votes balance for `account`
*/
function getVotes(address account) public view virtual override returns (uint256) {
uint256 pos = _checkpoints[account].length;
return pos == 0 ? 0 : _checkpoints[account][pos - 1].votes;
}
/**
* @dev Retrieve the number of votes for `account` at the end of `blockNumber`.
*
* Requirements:
*
* - `blockNumber` must have been already mined
*/
function getPastVotes(address account, uint256 blockNumber) public view virtual override returns (uint256) {
require(blockNumber < block.number, "ERC20Votes: block not yet mined");
return _checkpointsLookup(_checkpoints[account], blockNumber);
}
/**
* @dev Retrieve the `totalSupply` at the end of `blockNumber`. Note, this value is the sum of all balances.
* It is but NOT the sum of all the delegated votes!
*
* Requirements:
*
* - `blockNumber` must have been already mined
*/
function getPastTotalSupply(uint256 blockNumber) public view virtual override returns (uint256) {
require(blockNumber < block.number, "ERC20Votes: block not yet mined");
return _checkpointsLookup(_totalSupplyCheckpoints, blockNumber);
}
/**
* @dev Lookup a value in a list of (sorted) checkpoints.
*/
function _checkpointsLookup(Checkpoint[] storage ckpts, uint256 blockNumber) private view returns (uint256) {
// We run a binary search to look for the earliest checkpoint taken after `blockNumber`.
//
// During the loop, the index of the wanted checkpoint remains in the range [low-1, high).
// With each iteration, either `low` or `high` is moved towards the middle of the range to maintain the invariant.
// - If the middle checkpoint is after `blockNumber`, we look in [low, mid)
// - If the middle checkpoint is before or equal to `blockNumber`, we look in [mid+1, high)
// Once we reach a single value (when low == high), we've found the right checkpoint at the index high-1, if not
// out of bounds (in which case we're looking too far in the past and the result is 0).
// Note that if the latest checkpoint available is exactly for `blockNumber`, we end up with an index that is
// past the end of the array, so we technically don't find a checkpoint after `blockNumber`, but it works out
// the same.
uint256 high = ckpts.length;
uint256 low = 0;
while (low < high) {
uint256 mid = Math.average(low, high);
if (ckpts[mid].fromBlock > blockNumber) {
high = mid;
} else {
low = mid + 1;
}
}
return high == 0 ? 0 : ckpts[high - 1].votes;
}
/**
* @dev Delegate votes from the sender to `delegatee`.
*/
function delegate(address delegatee) public virtual override {
_delegate(_msgSender(), delegatee);
}
/**
* @dev Delegates votes from signer to `delegatee`
*/
function delegateBySig(
address delegatee,
uint256 nonce,
uint256 expiry,
uint8 v,
bytes32 r,
bytes32 s
) public virtual override {
require(block.timestamp <= expiry, "ERC20Votes: signature expired");
address signer = ECDSA.recover(
_hashTypedDataV4(keccak256(abi.encode(_DELEGATION_TYPEHASH, delegatee, nonce, expiry))),
v,
r,
s
);
require(nonce == _useNonce(signer), "ERC20Votes: invalid nonce");
_delegate(signer, delegatee);
}
/**
* @dev Maximum token supply. Defaults to `type(uint224).max` (2^224^ - 1).
*/
function _maxSupply() internal view virtual returns (uint224) {
return type(uint224).max;
}
/**
* @dev Snapshots the totalSupply after it has been increased.
*/
function _mint(address account, uint256 amount) internal virtual override {
super._mint(account, amount);
require(totalSupply() <= _maxSupply(), "ERC20Votes: total supply risks overflowing votes");
_writeCheckpoint(_totalSupplyCheckpoints, _add, amount);
}
/**
* @dev Snapshots the totalSupply after it has been decreased.
*/
function _burn(address account, uint256 amount) internal virtual override {
super._burn(account, amount);
_writeCheckpoint(_totalSupplyCheckpoints, _subtract, amount);
}
/**
* @dev Move voting power when tokens are transferred.
*
* Emits a {DelegateVotesChanged} event.
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual override {
super._afterTokenTransfer(from, to, amount);
_moveVotingPower(delegates(from), delegates(to), amount);
}
/**
* @dev Change delegation for `delegator` to `delegatee`.
*
* Emits events {DelegateChanged} and {DelegateVotesChanged}.
*/
function _delegate(address delegator, address delegatee) internal virtual {
address currentDelegate = delegates(delegator);
uint256 delegatorBalance = balanceOf(delegator);
_delegates[delegator] = delegatee;
emit DelegateChanged(delegator, currentDelegate, delegatee);
_moveVotingPower(currentDelegate, delegatee, delegatorBalance);
}
function _moveVotingPower(
address src,
address dst,
uint256 amount
) private {
if (src != dst && amount > 0) {
if (src != address(0)) {
(uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[src], _subtract, amount);
emit DelegateVotesChanged(src, oldWeight, newWeight);
}
if (dst != address(0)) {
(uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[dst], _add, amount);
emit DelegateVotesChanged(dst, oldWeight, newWeight);
}
}
}
function _writeCheckpoint(
Checkpoint[] storage ckpts,
function(uint256, uint256) view returns (uint256) op,
uint256 delta
) private returns (uint256 oldWeight, uint256 newWeight) {
uint256 pos = ckpts.length;
oldWeight = pos == 0 ? 0 : ckpts[pos - 1].votes;
newWeight = op(oldWeight, delta);
if (pos > 0 && ckpts[pos - 1].fromBlock == block.number) {
ckpts[pos - 1].votes = SafeCast.toUint224(newWeight);
} else {
ckpts.push(Checkpoint({fromBlock: SafeCast.toUint32(block.number), votes: SafeCast.toUint224(newWeight)}));
}
}
function _add(uint256 a, uint256 b) private pure returns (uint256) {
return a + b;
}
function _subtract(uint256 a, uint256 b) private pure returns (uint256) {
return a - b;
}
}
// File @openzeppelin/contracts/token/ERC20/extensions/ERC20VotesComp.sol@v4.5.0
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20VotesComp.sol)
pragma solidity ^0.8.0;
/**
* @dev Extension of ERC20 to support Compound's voting and delegation. This version exactly matches Compound's
* interface, with the drawback of only supporting supply up to (2^96^ - 1).
*
* NOTE: You should use this contract if you need exact compatibility with COMP (for example in order to use your token
* with Governor Alpha or Bravo) and if you are sure the supply cap of 2^96^ is enough for you. Otherwise, use the
* {ERC20Votes} variant of this module.
*
* This extension keeps a history (checkpoints) of each account's vote power. Vote power can be delegated either
* by calling the {delegate} function directly, or by providing a signature to be used with {delegateBySig}. Voting
* power can be queried through the public accessors {getCurrentVotes} and {getPriorVotes}.
*
* By default, token balance does not account for voting power. This makes transfers cheaper. The downside is that it
* requires users to delegate to themselves in order to activate checkpoints and have their voting power tracked.
*
* _Available since v4.2._
*/
abstract contract ERC20VotesComp is ERC20Votes {
/**
* @dev Comp version of the {getVotes} accessor, with `uint96` return type.
*/
function getCurrentVotes(address account) external view virtual returns (uint96) {
return SafeCast.toUint96(getVotes(account));
}
/**
* @dev Comp version of the {getPastVotes} accessor, with `uint96` return type.
*/
function getPriorVotes(address account, uint256 blockNumber) external view virtual returns (uint96) {
return SafeCast.toUint96(getPastVotes(account, blockNumber));
}
/**
* @dev Maximum token supply. Reduced to `type(uint96).max` (2^96^ - 1) to fit COMP interface.
*/
function _maxSupply() internal view virtual override returns (uint224) {
return type(uint96).max;
}
}
// File @openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol@v4.5.0
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
_spendAllowance(account, _msgSender(), amount);
_burn(account, amount);
}
}
// File contracts/KaidexToken.sol
pragma solidity ^0.8.0;
contract KaiDexToken is ERC20Burnable, ERC20VotesComp, Ownable {
constructor(
string memory name_,
string memory symbol_
) ERC20(name_, symbol_) Ownable() ERC20Permit(name_) {}
function mint(address _to, uint256 _amount) public onlyOwner {
_mint(_to, _amount);
}
function _mint(address account, uint256 amount) internal virtual override(ERC20, ERC20Votes) {
super._mint(account, amount);
}
function _burn(address _account, uint256 _amount) internal override(ERC20, ERC20Votes) {
super._burn(_account, _amount);
}
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal override(ERC20, ERC20Votes) {
super._afterTokenTransfer(from, to, amount);
}
}
// File contracts/farming/KaidexMasterChef.sol
pragma solidity ^0.8.0;
contract KaidexMasterChef is Ownable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
// Info of each user.
struct UserInfo {
uint256 amount; // How many LP tokens the user has provided.
uint256 rewardDebt; // Reward debt. See explanation below.
}
// Info of each pool.
struct PoolInfo {
IERC20 lpToken; // Address of LP token contract.
uint256 allocPoint; // How many allocation points assigned to this pool. KDXs to distribute per block.
uint256 lastRewardBlock; // Last block number that KDXs distribution occurs.
uint256 accKDXPerShare; // Accumulated KDXs per share, times 1e12. See below.
}
// The KDX TOKEN
KaiDexToken public kdx;
// KDX tokens created per block.
uint256 public kdxPerBlock;
// Info of each pool.
PoolInfo[] public poolInfo;
// Info of each user that stakes LP tokens.
mapping(uint256 => mapping(address => UserInfo)) public userInfo;
// Total allocation poitns. Must be the sum of all allocation points in all pools.
uint256 public totalAllocPoint = 0;
// The block number when KDX mining starts.
uint256 public startBlock;
event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
event EmergencyWithdraw(
address indexed user,
uint256 indexed pid,
uint256 amount
);
event LogPoolAddition(
uint256 indexed pid,
uint256 allocPoint,
IERC20 indexed lpToken
);
event LogSetPool(
uint256 indexed pid,
uint256 allocPoint
);
event LogUpdatePool(
uint256 indexed pid,
uint256 lastRewardBlock,
uint256 lpSupply,
uint256 accKdxPerShare
);
event UpdateKdxPerBlock (
uint256 _oldKdxPerblock,
uint256 _newKdxPerblock
);
constructor(
KaiDexToken _kdx,
uint256 _kdxPerBlock,
uint256 _startBlock
) public {
kdx = _kdx;
kdxPerBlock = _kdxPerBlock;
startBlock = _startBlock;
}
function poolLength() external view returns (uint256) {
return poolInfo.length;
}
function updateStartBlock (uint256 _newStartBlock) public onlyOwner {
require(startBlock > block.number, "wrong time");
startBlock = _newStartBlock;
}
// updateKdxPerBlock, can update the kdx per block only onwer can update this field
function updateKdxPerBlock(uint256 _newKdxPerBlock) public onlyOwner {
massUpdatePools();
uint256 _oldKdxPerblock = kdxPerBlock;
kdxPerBlock = _newKdxPerBlock;
emit UpdateKdxPerBlock(_oldKdxPerblock, kdxPerBlock);
}
// Add a new lp to the pool. Can only be called by the owner.
// XXX DO NOT add the same LP token more than once. Rewards will be messed up if you do.
function add(
uint256 _allocPoint,
IERC20 _lpToken,
bool _withUpdate
) public onlyOwner {
if (_withUpdate) {
massUpdatePools();
}
uint256 lastRewardBlock =
block.number > startBlock ? block.number : startBlock;
totalAllocPoint = totalAllocPoint.add(_allocPoint);
poolInfo.push(
PoolInfo({
lpToken: _lpToken,
allocPoint: _allocPoint,
lastRewardBlock: lastRewardBlock,
accKDXPerShare: 0
})
);
emit LogPoolAddition(poolInfo.length.sub(1), _allocPoint, _lpToken);
}
// Update the given pool's KDX allocation point or rewarder. Can only be called by the owner.
function set(
uint256 _pid,
uint256 _allocPoint,
bool _withUpdate
) public onlyOwner {
if (_withUpdate) {
massUpdatePools();
}
totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(
_allocPoint
);
poolInfo[_pid].allocPoint = _allocPoint;
emit LogSetPool(_pid, _allocPoint);
}
// Return reward multiplier over the given _from to _to block.
function getMultiplier(uint256 _from, uint256 _to)
public
pure
returns (uint256)
{
return _to.sub(_from);
}
// View function to see pending KDXs on frontend.
function pendingKDX(uint256 _pid, address _user)
external
view
returns (uint256)
{
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][_user];
uint256 accKdxPerShare = pool.accKDXPerShare;
uint256 lpSupply = pool.lpToken.balanceOf(address(this));
if (block.number > pool.lastRewardBlock && lpSupply != 0) {
uint256 multiplier =
getMultiplier(pool.lastRewardBlock, block.number);
uint256 kdxReward =
multiplier.mul(kdxPerBlock).mul(pool.allocPoint).div(
totalAllocPoint
);
accKdxPerShare = accKdxPerShare.add(
kdxReward.mul(1e12).div(lpSupply)
);
}
return user.amount.mul(accKdxPerShare).div(1e12).sub(user.rewardDebt);
}
// Update reward vairables for all pools. Be careful of gas spending!
function massUpdatePools() public {
uint256 length = poolInfo.length;
for (uint256 pid = 0; pid < length; ++pid) {
updatePool(pid);
}
}
// Update reward variables of the given pool to be up-to-date.
function updatePool(uint256 _pid) public {
PoolInfo storage pool = poolInfo[_pid];
if (block.number <= pool.lastRewardBlock) {
return;
}
uint256 lpSupply = pool.lpToken.balanceOf(address(this));
if (lpSupply == 0) {
pool.lastRewardBlock = block.number;
return;
}
uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
uint256 kdxReward =
multiplier.mul(kdxPerBlock).mul(pool.allocPoint).div(
totalAllocPoint
);
kdx.mint(address(this), kdxReward);
pool.accKDXPerShare = pool.accKDXPerShare.add(
kdxReward.mul(1e12).div(lpSupply)
);
pool.lastRewardBlock = block.number;
emit LogUpdatePool(_pid, pool.lastRewardBlock, lpSupply, pool.accKDXPerShare);
}
// Internal deposit function to deposit LP tokens to MasterChef for KDX allocation.
function _deposit(uint256 _pid, uint256 _amount, address userAddress) internal {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][userAddress];
updatePool(_pid);
uint256 pending = 0;
if (user.amount > 0) {
pending =
user.amount.mul(pool.accKDXPerShare).div(1e12).sub(
user.rewardDebt
);
safeKDXTransfer(userAddress, pending);
}
pool.lpToken.safeTransferFrom(
address(userAddress),
address(this),
_amount
);
user.amount = user.amount.add(_amount);
user.rewardDebt = user.amount.mul(pool.accKDXPerShare).div(1e12);
emit Deposit(userAddress, _pid, _amount);
}
// Deposit LP tokens to MasterChef for KDX allocation.
function deposit(uint256 _pid, uint256 _amount) public {
_deposit(_pid, _amount, msg.sender);
}
// Harvest KDX rewards from MasterChef pools.
function harvest(uint256 _pid) public {
_deposit(_pid, 0, msg.sender);
}
// Withdraw LP tokens from MasterChef.
function withdraw(uint256 _pid, uint256 _amount) public {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
require(user.amount >= _amount, "withdraw: not good");
updatePool(_pid);
uint256 pending =
user.amount.mul(pool.accKDXPerShare).div(1e12).sub(
user.rewardDebt
);
safeKDXTransfer(msg.sender, pending);
user.amount = user.amount.sub(_amount);
user.rewardDebt = user.amount.mul(pool.accKDXPerShare).div(1e12);
pool.lpToken.safeTransfer(address(msg.sender), _amount);
emit Withdraw(msg.sender, _pid, _amount);
}
// Withdraw without caring about rewards. EMERGENCY ONLY.
function emergencyWithdraw(uint256 _pid) public {
PoolInfo storage pool = poolInfo[_pid];
UserInfo storage user = userInfo[_pid][msg.sender];
pool.lpToken.safeTransfer(address(msg.sender), user.amount);
user.amount = 0;
user.rewardDebt = 0;
emit EmergencyWithdraw(msg.sender, _pid, user.amount);
}
// Safe kdx transfer function, just in case if rounding error causes pool to not have enough KDXs.
function safeKDXTransfer(address _to, uint256 _amount) internal {
uint256 kdxBal = kdx.balanceOf(address(this));
if (_amount > kdxBal) {
kdx.transfer(_to, kdxBal);
} else {
kdx.transfer(_to, _amount);
}
}
}
Contract ABI
[{"type":"constructor","stateMutability":"nonpayable","inputs":[{"type":"address","name":"_kdx","internalType":"contract KaiDexToken"},{"type":"uint256","name":"_kdxPerBlock","internalType":"uint256"},{"type":"uint256","name":"_startBlock","internalType":"uint256"}]},{"type":"event","name":"Deposit","inputs":[{"type":"address","name":"user","internalType":"address","indexed":true},{"type":"uint256","name":"pid","internalType":"uint256","indexed":true},{"type":"uint256","name":"amount","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"EmergencyWithdraw","inputs":[{"type":"address","name":"user","internalType":"address","indexed":true},{"type":"uint256","name":"pid","internalType":"uint256","indexed":true},{"type":"uint256","name":"amount","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"LogPoolAddition","inputs":[{"type":"uint256","name":"pid","internalType":"uint256","indexed":true},{"type":"uint256","name":"allocPoint","internalType":"uint256","indexed":false},{"type":"address","name":"lpToken","internalType":"contract IERC20","indexed":true}],"anonymous":false},{"type":"event","name":"LogSetPool","inputs":[{"type":"uint256","name":"pid","internalType":"uint256","indexed":true},{"type":"uint256","name":"allocPoint","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"LogUpdatePool","inputs":[{"type":"uint256","name":"pid","internalType":"uint256","indexed":true},{"type":"uint256","name":"lastRewardBlock","internalType":"uint256","indexed":false},{"type":"uint256","name":"lpSupply","internalType":"uint256","indexed":false},{"type":"uint256","name":"accKdxPerShare","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"OwnershipTransferred","inputs":[{"type":"address","name":"previousOwner","internalType":"address","indexed":true},{"type":"address","name":"newOwner","internalType":"address","indexed":true}],"anonymous":false},{"type":"event","name":"UpdateKdxPerBlock","inputs":[{"type":"uint256","name":"_oldKdxPerblock","internalType":"uint256","indexed":false},{"type":"uint256","name":"_newKdxPerblock","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"event","name":"Withdraw","inputs":[{"type":"address","name":"user","internalType":"address","indexed":true},{"type":"uint256","name":"pid","internalType":"uint256","indexed":true},{"type":"uint256","name":"amount","internalType":"uint256","indexed":false}],"anonymous":false},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"add","inputs":[{"type":"uint256","name":"_allocPoint","internalType":"uint256"},{"type":"address","name":"_lpToken","internalType":"contract IERC20"},{"type":"bool","name":"_withUpdate","internalType":"bool"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"deposit","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"},{"type":"uint256","name":"_amount","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"emergencyWithdraw","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"}]},{"type":"function","stateMutability":"pure","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"getMultiplier","inputs":[{"type":"uint256","name":"_from","internalType":"uint256"},{"type":"uint256","name":"_to","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"harvest","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"contract KaiDexToken"}],"name":"kdx","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"kdxPerBlock","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"massUpdatePools","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"owner","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"pendingKDX","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"},{"type":"address","name":"_user","internalType":"address"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"lpToken","internalType":"contract IERC20"},{"type":"uint256","name":"allocPoint","internalType":"uint256"},{"type":"uint256","name":"lastRewardBlock","internalType":"uint256"},{"type":"uint256","name":"accKDXPerShare","internalType":"uint256"}],"name":"poolInfo","inputs":[{"type":"uint256","name":"","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"poolLength","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"renounceOwnership","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"set","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"},{"type":"uint256","name":"_allocPoint","internalType":"uint256"},{"type":"bool","name":"_withUpdate","internalType":"bool"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"startBlock","inputs":[]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"","internalType":"uint256"}],"name":"totalAllocPoint","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"transferOwnership","inputs":[{"type":"address","name":"newOwner","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"updateKdxPerBlock","inputs":[{"type":"uint256","name":"_newKdxPerBlock","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"updatePool","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"updateStartBlock","inputs":[{"type":"uint256","name":"_newStartBlock","internalType":"uint256"}]},{"type":"function","stateMutability":"view","outputs":[{"type":"uint256","name":"amount","internalType":"uint256"},{"type":"uint256","name":"rewardDebt","internalType":"uint256"}],"name":"userInfo","inputs":[{"type":"uint256","name":"","internalType":"uint256"},{"type":"address","name":"","internalType":"address"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"withdraw","inputs":[{"type":"uint256","name":"_pid","internalType":"uint256"},{"type":"uint256","name":"_amount","internalType":"uint256"}]}]
Contract Creation Code
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 ByteCode
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